Protocol Analysis

Protocol analysis skill for serial bus debugging. Use when decoding I2C/SPI/UART with logic analyzer concepts, sigrok/PulseView, or Python capture scripts. Activates on queries about logic analyzer, sigrok, PulseView, decode I2C SPI UART, or bus protocol capture.

293 stars 36 forksSoftware Development

Install

skills CLI (Claude Code, Cursor, Codex and more)
npx skills add mohitmishra786/low-level-dev-skills --skill protocol-analysis
Manual install
git clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/qemu/protocol-analysis ~/.claude/skills/protocol-analysis

Personal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.

From the SKILL.md

# Protocol Analysis (I2C / SPI / UART)

## Purpose

Guide agents through software-side serial bus analysis: logic analyzer workflow, sigrok/PulseView decoding, correlating captures with firmware drivers, and Python-based parsing — bridging `skills/baremetal/spi-i2c-baremetal` and hardware bring-up.

## When to Use

- Sensor not responding — verify clock and data on bus
- Compare kernel driver transactions vs datasheet
- Document expected transaction format for CI/regression
- Teaching protocol layers without expensive lab gear (sim + decode)

## Workflow

### 1. Capture stack

```
Physical probe → logic analyzer hardware (or GPIO bit-bang)
├── sigrok-cli / PulseView GUI
├── Protocol decoder (i2c, spi, uart)
└── Export VCD/CSV for scripts
```

Open-source: [sigrok](https://sigrok.org/) with cheap FX2LA boards.

### 2. PulseView quick start

```bash
# List devices
pulseview

# CLI capture (device-dependent)
sigrok-cli --driver fx2lafw --config samplerate=1MHz \
  --channels 0=SDA,1=SCL \
  --samples 1m \
  --protocols i2c
```

### 3. I2C decode expectations

| Phase | Lines |
|-------|-------|
| START | SDA fall while SCL high |
| Address + R/W | 7 bits + ACK |
| Data bytes | ACK per byte |
| STOP | SDA rise while SCL high |

NACK at address → wrong `0x48` or device held in reset.

### 4. SPI decode

Check mode (CPOL/CPHA), bit order (MSB first typical), CS polarity, and word size. Compare to `spi_setup()` in `skills/kernel-dev/bus-drivers-i2c-spi`.

### 5. UART decode
Read the full skill on GitHub

Details

Skill name
protocol-analysis
Path
skills/qemu/protocol-analysis/SKILL.md
License
MIT
Repo updated
14 November 2026

FAQ

What does the Protocol Analysis skill do?

Protocol analysis skill for serial bus debugging. Use when decoding I2C/SPI/UART with logic analyzer concepts, sigrok/PulseView, or Python capture scripts. Activates on queries about logic analyzer, sigrok, PulseView, decode I2C SPI UART, or bus protocol capture.

How do I install the Protocol Analysis skill?

skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill protocol-analysis. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.

Is Protocol Analysis popular?

It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.

Related skills

Abi and Calling Conventions

293

mohitmishra786/low-level-dev-skills

ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.

Software Development36

Adc Dac Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.

Other36

Af Xdp

293

mohitmishra786/low-level-dev-skills

AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.

Software Development36

Qemu for Kernel Development

293

mohitmishra786/low-level-dev-skills

QEMU kernel development skill for driver and kernel testing. Use when booting custom kernels in QEMU, Buildroot/Yocto rootfs, virtio devices, or NFS root for driver iteration. Activates on queries about QEMU kernel dev, Buildroot QEMU, virtio block, kernel module test QEMU, or -append root=

Software Development36

Openocd Jtag

293

mohitmishra786/low-level-dev-skills

OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.

Software Development36

Qemu Kvm

293

mohitmishra786/low-level-dev-skills

QEMU/KVM skill for virtualization and kernel development. Use when running qemu-system-x86_64 with KVM, configuring virtio devices, VFIO passthrough, QMP monitor, libvirt, or booting custom kernels. Activates on queries about QEMU, KVM, virtio, VFIO, virsh, virt-install, or -kernel -append.

Software Development36

Browse the most popular Claude skills, all software development skills, or write your own with the skills generator.