Openocd Jtag

OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.

293 stars 36 forksSoftware Development

Install

skills CLI (Claude Code, Cursor, Codex and more)
npx skills add mohitmishra786/low-level-dev-skills --skill openocd-jtag
Manual install
git clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/embedded/openocd-jtag ~/.claude/skills/openocd-jtag

Personal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.

From the SKILL.md

# OpenOCD / JTAG Debugging

## Purpose

Guide agents through configuring OpenOCD for JTAG and SWD targets, flashing firmware to microcontrollers, attaching GDB for bare-metal debugging, setting hardware watchpoints, and configuring J-Link and CMSIS-DAP adapters.

## Triggers

- "How do I connect GDB to my MCU with OpenOCD?"
- "How do I flash firmware using OpenOCD?"
- "How do I set up J-Link with OpenOCD?"
- "What's the difference between JTAG and SWD?"
- "How do I set a hardware watchpoint in GDB?"
- "OpenOCD says 'Error: unable to find JTAG device' — how do I fix it?"

## Workflow

### 1. JTAG vs SWD

| Feature | JTAG | SWD (Serial Wire Debug) |
|---------|------|------------------------|
| Pins | 4+ (TCK, TMS, TDI, TDO, TRST) | 2 (SWCLK, SWDIO) |
| Multi-target | Yes (daisy chain) | No (one target) |
| Speed | Up to 30 MHz | Up to 10 MHz |
| Availability | Full JTAG: Cortex-A/R, RISC-V | SWD: Cortex-M only |
| Cable cost | More complex | Simpler 2-wire |

Most Cortex-M microcontrollers support both. Use SWD when pin count is limited.

### 2. OpenOCD configuration

```tcl
# openocd.cfg — CMSIS-DAP (ST-Link v2, DAPLink)
source [find interface/cmsis-dap.cfg]
source [find target/stm32f4x.cfg]
adapter speed 4000              # kHz

# For SWD explicitly
transport select swd

# J-Link adapter
source [find interface/jlink.cfg]
jlink serial 123456789          # optional: select by serial
source [find target/nrf52.cfg]
adapter speed 8000
```
Read the full skill on GitHub

Details

Skill name
openocd-jtag
Path
skills/embedded/openocd-jtag/SKILL.md
License
MIT
Repo updated
14 November 2026

FAQ

What does the Openocd Jtag skill do?

OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.

How do I install the Openocd Jtag skill?

skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill openocd-jtag. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.

Is Openocd Jtag popular?

It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.

Related skills

Abi and Calling Conventions

293

mohitmishra786/low-level-dev-skills

ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.

Software Development36

Adc Dac Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.

Other36

Af Xdp

293

mohitmishra786/low-level-dev-skills

AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.

Software Development36

Protocol Analysis

293

mohitmishra786/low-level-dev-skills

Protocol analysis skill for serial bus debugging. Use when decoding I2C/SPI/UART with logic analyzer concepts, sigrok/PulseView, or Python capture scripts. Activates on queries about logic analyzer, sigrok, PulseView, decode I2C SPI UART, or bus protocol capture.

Software Development36

Numa Programming

293

mohitmishra786/low-level-dev-skills

NUMA programming skill for multi-socket memory locality. Use when detecting NUMA topology, binding processes with numactl, using libnuma API, building NUMA-aware data structures, or measuring remote access penalties. Activates on queries about numactl, libnuma, NUMA topology, mbind, lstopo, or remote memory access.

Software Development36

Qemu for Kernel Development

293

mohitmishra786/low-level-dev-skills

QEMU kernel development skill for driver and kernel testing. Use when booting custom kernels in QEMU, Buildroot/Yocto rootfs, virtio devices, or NFS root for driver iteration. Activates on queries about QEMU kernel dev, Buildroot QEMU, virtio block, kernel module test QEMU, or -append root=

Software Development36

Browse the most popular Claude skills, all software development skills, or write your own with the skills generator.