Uart Serial Baremetal

Bare-metal UART skill for serial console and debug. Use when configuring baud rate, polling or IRQ-driven TX/RX, or integrating DMA with UART. Activates on queries about UART bare-metal, baud BRR, serial printf, or USART interrupt.

293 stars 36 forksSoftware Development

Install

skills CLI (Claude Code, Cursor, Codex and more)
npx skills add mohitmishra786/low-level-dev-skills --skill uart-serial-baremetal
Manual install
git clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/baremetal/uart-serial-baremetal ~/.claude/skills/uart-serial-baremetal

Personal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.

From the SKILL.md

# UART Serial (Bare-Metal)

## Purpose

Implement UART/USART for debug console and device communication: baud rate calculation, 8N1 framing, polling and interrupt-driven I/O, overrun handling, and optional DMA basics.

## When to Use

- First `printf`/log output on new hardware
- Serial protocol to sensor/module
- Replacing blocking HAL_UART with minimal driver
- Fixing garbled or missing characters

## Workflow

### 1. Baud rate (STM32)

```
BRR = pclk / (16 * baud)   /* oversampling by 16 — check RM for USART */
```

```c
void usart2_init(uint32_t pclk, uint32_t baud) {
    RCC->APB1ENR |= RCC_APB1ENR_USART2EN;
    /* GPIO PA2/PA3 AF — see gpio-baremetal */

    USART2->BRR = pclk / baud;  /* simplified — RM has fractional formula */
    USART2->CR1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE;
}
```

Verify `pclk` from actual clock tree (`SystemCoreClock`, APB prescaler).

### 2. Polling TX/RX

```c
void uart_putc(USART_TypeDef *u, char c) {
    while (!(u->SR & USART_SR_TXE))
        ;
    u->DR = (uint8_t)c;
}

char uart_getc(USART_TypeDef *u) {
    while (!(u->SR & USART_SR_RXNE))
        ;
    return (uint8_t)u->DR;
}
```

### 3. Interrupt-driven RX ring buffer

```c
void USART2_IRQHandler(void) {
    if (USART2->SR & USART_SR_RXNE) {
        uint8_t b = USART2->DR;
        rb_push(&rx_rb, b);
    }
    if (USART2->SR & USART_SR_ORE) {
        (void)USART2->DR;  /* clear overrun — required on STM32 */
    }
}
```

### 4. retarget `printf` (newlib)
Read the full skill on GitHub

Details

Skill name
uart-serial-baremetal
Path
skills/baremetal/uart-serial-baremetal/SKILL.md
License
MIT
Repo updated
14 November 2026

FAQ

What does the Uart Serial Baremetal skill do?

Bare-metal UART skill for serial console and debug. Use when configuring baud rate, polling or IRQ-driven TX/RX, or integrating DMA with UART. Activates on queries about UART bare-metal, baud BRR, serial printf, or USART interrupt.

How do I install the Uart Serial Baremetal skill?

skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill uart-serial-baremetal. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.

Is Uart Serial Baremetal popular?

It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.

Related skills

Abi and Calling Conventions

293

mohitmishra786/low-level-dev-skills

ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.

Software Development36

Adc Dac Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.

Other36

Af Xdp

293

mohitmishra786/low-level-dev-skills

AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.

Software Development36

Zephyr

293

mohitmishra786/low-level-dev-skills

Zephyr RTOS skill for embedded development. Use when building Zephyr applications with west, configuring boards and targets, working with Kconfig and devicetree, using the Zephyr shell and logging subsystem, or running on the native_sim target. Activates on queries about Zephyr, west build, Kconfig, devicetree, Zephyr logging, west flash, board targets, or native POSIX simulation.

Software Development36

Strace Ltrace

293

mohitmishra786/low-level-dev-skills

strace and ltrace skill for system call and library call tracing. Use when a binary behaves incorrectly without crashing, diagnosing file-not-found errors, permission failures, network issues, or unexpected library calls by tracing syscalls and library function calls. Activates on queries about strace, ltrace, syscall tracing, library interception, ENOENT, EPERM, strace -e, or diagnosing binary behaviour without a debugger.

Software Development36

Zig Compiler

293

mohitmishra786/low-level-dev-skills

Zig compiler skill for systems programming. Use when compiling Zig programs, selecting optimization modes, using zig cc as a C compiler, reading Zig error messages, or understanding Zig's compilation model. Activates on queries about zig build-exe, zig build-lib, optimize modes, ReleaseSafe, ReleaseFast, ReleaseSmall, zig cc, zig ast-check, or Zig compilation errors.

Software Development36

Browse the most popular Claude skills, all software development skills, or write your own with the skills generator.