Timers Pwm Baremetal
Bare-metal timer and PWM skill. Use when configuring general-purpose timers for PWM, input capture, or periodic ticks without RTOS. Activates on queries about timer prescaler, PWM duty cycle, input capture, or SysTick bare-metal.
Install
npx skills add mohitmishra786/low-level-dev-skills --skill timers-pwm-baremetalgit clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/baremetal/timers-pwm-baremetal ~/.claude/skills/timers-pwm-baremetalPersonal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.
From the SKILL.md
# Timers and PWM (Bare-Metal)
## Purpose
Configure MCU timers for PWM output, input capture, and periodic scheduling: prescaler/ARR setup, compare channels, and SysTick as a simple tick source.
## When to Use
- Motor/LED dimming via PWM
- Measuring pulse width (input capture)
- Bare-metal `millis()` without FreeRTOS
- Hardware periodic sampling trigger
## Workflow
### 1. PWM on TIM2 CH1 (STM32)
```
f_pwm = f_timer_clk / ((PSC+1) * (ARR+1))
duty = (CCR / (ARR+1)) * 100%
```
```c
RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
TIM2->PSC = 83; /* 84MHz / 84 = 1 MHz tick */
TIM2->ARR = 999; /* 1 kHz PWM */
TIM2->CCR1 = 500; /* 50% duty */
TIM2->CCMR1 |= (6U << TIM_CCMR1_OC1M_Pos); /* PWM mode 1 */
TIM2->CCER |= TIM_CCER_CC1E;
TIM2->CR1 |= TIM_CR1_CEN;
```
GPIO: PA0 AF1 TIM2_CH1.
### 2. SysTick tick
```c
volatile uint32_t tick_ms;
void SysTick_Handler(void) {
tick_ms++;
}
void systick_init(uint32_t hz) {
SysTick_Config(SystemCoreClock / hz);
}
```
### 3. Input capture
Configure channel in `CCMR` as input, set `CCER` polarity, read `CCR` on interrupt when edge captured.
### 4. Agent usage
```
/timers-pwm-baremetal 1 kHz 25% duty PWM on TIM2 channel 1
```
## Common Problems
| Symptom | Cause | Fix |
|---------|-------|-----|
| Wrong frequency | APB timer clock doubling | Check RM timer clock x2 rule |
| No PWM output | CCER/CCMR not enabled | Enable channel output |
| Jittery tick | SysTick overridden | One owner for SysTick |
## Related SkillsDetails
- Skill name
timers-pwm-baremetal- Repository
- mohitmishra786/low-level-dev-skills
- Path
skills/baremetal/timers-pwm-baremetal/SKILL.md- License
- MIT
- Repo updated
- 14 November 2026
FAQ
What does the Timers Pwm Baremetal skill do?
Bare-metal timer and PWM skill. Use when configuring general-purpose timers for PWM, input capture, or periodic ticks without RTOS. Activates on queries about timer prescaler, PWM duty cycle, input capture, or SysTick bare-metal.
How do I install the Timers Pwm Baremetal skill?
skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill timers-pwm-baremetal. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.
Is Timers Pwm Baremetal popular?
It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.
Related skills
Abi and Calling Conventions
293mohitmishra786/low-level-dev-skills
ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.
Adc Dac Baremetal
293mohitmishra786/low-level-dev-skills
Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.
Af Xdp
293mohitmishra786/low-level-dev-skills
AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.
Verilog Basics for Lowlevel
293mohitmishra786/low-level-dev-skills
Verilog basics skill for firmware and kernel engineers. Use when reading RTL to understand hardware behavior, reset/clock domains, bus protocols, or collaborating with hardware teams. Activates on queries about Verilog basics, RTL, hardware description, clock domain, reset synchronizer, or MMU in hardware.
Stm32 Baremetal
293mohitmishra786/low-level-dev-skills
STM32 bare-metal skill for CMSIS-only MCU projects. Use when scaffolding STM32 firmware without HAL, configuring clocks/RCC, using CMSIS headers, or building with arm-none-eabi-gcc. Activates on queries about STM32 bare metal, CMSIS without HAL, STM32F4/H7 bring-up, or minimal Makefile CMake for Cortex-M.
Zig Comptime
293mohitmishra786/low-level-dev-skills
Zig comptime skill for compile-time evaluation and metaprogramming. Use when using comptime parameters, comptime types, generics via anytype, comptime reflection with @typeInfo, or metaprogramming patterns that replace C++ templates. Activates on queries about Zig comptime, compile-time evaluation, Zig generics, anytype, @typeInfo, comptime types, or Zig metaprogramming.
Browse the most popular Claude skills, all other skills, or write your own with the skills generator.