Peripherals From Datasheet

Peripheral driver methodology skill from MCU reference manuals. Use when reading register maps, timing diagrams, and writing drivers from vendor documentation. Activates on queries about reference manual, register map, peripheral init sequence, or datasheet-driven driver design.

293 stars 36 forksWriting & Content

Install

skills CLI (Claude Code, Cursor, Codex and more)
npx skills add mohitmishra786/low-level-dev-skills --skill peripherals-from-datasheet
Manual install
git clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/baremetal/peripherals-from-datasheet ~/.claude/skills/peripherals-from-datasheet

Personal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.

From the SKILL.md

# Peripherals from Datasheet

## Purpose

Guide agents through a repeatable methodology for writing peripheral drivers from MCU reference manuals: locating register maps, interpreting bit definitions, following init sequences, respecting timing constraints, and producing maintainable register-level code. Pair with `skills/baremetal/datasheet-and-refmanual-reading` for doc-navigation methodology (kept as separate skills).

## When to Use

- Starting a driver without vendor HAL
- Porting a peripheral between MCU families
- Verifying HAL behavior against the reference manual
- Debugging a peripheral that "should work" per examples

## Workflow

### 1. Reference manual navigation

```
Typical RM structure
├── Memory map (peripheral base addresses)
├── Peripheral chapter (UART, SPI, GPIO, ...)
│   ├── Functional description
│   ├── Register map (table of offsets)
│   ├── Register bit definitions
│   └── Timing / electrical notes
└── Electrical characteristics (clock limits, setup/hold)
```

Start with the **programming model** section before copying register writes.

### 2. Extract register map

```c
/* From RM — USART base 0x40004400 */
typedef struct {
    volatile uint32_t SR;   /* 0x00 status */
    volatile uint32_t DR;   /* 0x04 data */
    volatile uint32_t BRR;  /* 0x08 baud */
    volatile uint32_t CR1;  /* 0x0C control */
    /* ... */
} USART_TypeDef;

#define USART2 ((USART_TypeDef *)0x40004400UL)
```
Read the full skill on GitHub

Details

Skill name
peripherals-from-datasheet
Path
skills/baremetal/peripherals-from-datasheet/SKILL.md
License
MIT
Repo updated
14 November 2026

FAQ

What does the Peripherals From Datasheet skill do?

Peripheral driver methodology skill from MCU reference manuals. Use when reading register maps, timing diagrams, and writing drivers from vendor documentation. Activates on queries about reference manual, register map, peripheral init sequence, or datasheet-driven driver design.

How do I install the Peripherals From Datasheet skill?

skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill peripherals-from-datasheet. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.

Is Peripherals From Datasheet popular?

It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.

Related skills

Abi and Calling Conventions

293

mohitmishra786/low-level-dev-skills

ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.

Software Development36

Adc Dac Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.

Other36

Af Xdp

293

mohitmishra786/low-level-dev-skills

AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.

Software Development36

Sop Writer

171

aiskilloftheweek/claude-ai-skill-of-the-week

Transforms any process description — however rough, incomplete, or disorganized — into a clear, delegatable Standard Operating Procedure (SOP). Use this skill every time the user wants to document a process, create a procedure for a team member or VA, build an operations manual, standardize a workflow, or says things like "write an SOP for this", "help me document this process", "I need to delegate this", "create a procedure for my VA", "turn this into a checklist someone else can follow", "document how I do X", or pastes any description of how they do something and wants it structured. Always

Writing & Content35

Os Dev Scratch

293

mohitmishra786/low-level-dev-skills

OS development from scratch skill for bootloader through context switching. Use when building a minimal x86-64 OS, setting up GDT/IDT/page tables, writing keyboard/serial drivers, or using QEMU for kernel boot. Activates on queries about bootloader, long mode, page tables, IDT, PIC/APIC, xv6, or x86_64-elf-gcc.

Writing & Content36

Spi I2c Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal SPI and I2C skill for serial peripheral buses. Use when implementing master-mode transfers, register read/write protocols, or debugging bus stalls. Activates on queries about SPI bare-metal, I2C START/STOP, sensor register read, or clock phase/polarity.

Writing & Content36

Browse the most popular Claude skills, all writing & content skills, or write your own with the skills generator.