Jtagprobe
Probe IoT/embedded targets for exposed SWD/JTAG debug interfaces using a SEGGER J-Link. Detects whether debug is OPEN, LOCKED (readout-protected), or DEAD (fused off). Use when assessing whether a target's on-chip debug port can be reached, identifying the silicon vendor from DPIDR/IDCODE, and confirming halt+memory access for full debugger control.
Install
/plugin marketplace add BrownFineSecurity/iothackbotThe repo is a Claude Code plugin marketplace. Run /plugin afterwards to pick the plugin that includes this skill.
npx skills add BrownFineSecurity/iothackbot --skill jtagprobegit clone --depth 1 https://github.com/BrownFineSecurity/iothackbot.git /tmp/iothackbot
mkdir -p ~/.claude/skills
cp -r /tmp/iothackbot/skills/jtagprobe ~/.claude/skills/jtagprobePersonal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.
From the SKILL.md
# Jtagprobe — SWD/JTAG Debug Interface Tester You are helping the user determine whether a target's on-chip debug interface is exposed via SWD or JTAG, using the `jtagprobe` tool. This drives a SEGGER J-Link physically wired to the target. ## What the tool tests Three nested access layers are checked, and the target is classified into one of: - `OPEN` — DP responds, CPU halts, memory reads return plausible data. Full debugger control. Critical finding. - `LOCKED` — DP/IDCODE accessible but memory reads fail or return readout-protection sentinels (0xFFFFFFFF). Indicates STM32 RDP, NXP CRP, Nordic APPROTECT, etc. are engaged. Still a finding — the port should not respond at all in production. - `DEAD` — No DP/IDCODE response on any tested interface/speed. Debug fused off, pins not wired, or wrong target. ## Prerequisites - A SEGGER J-Link (any variant) connected via USB - `JLinkExe` on PATH — verify with `which JLinkExe`. If it is installed but not on PATH, point the tool at it with `--jlink-binary /path/to/JLinkExe` instead of relying on PATH. - Target wired to the J-Link 20-pin (or 10-pin Cortex Debug) header. Confirm SWDIO/SWCLK or TDI/TDO/TMS/TCK identification before energizing the target. If `JLinkExe` cannot be found at all, tell the user to install SEGGER J-Link software from segger.com. Do not attempt to install it without explicit approval. ## Basic usage Default — sweep SWD then JTAG at 4000/1000/100 kHz, halt, read memory, classify: ```bash jtagprobe ```
Details
- Skill name
jtagprobe- Repository
- BrownFineSecurity/iothackbot
- Path
skills/jtagprobe/SKILL.md- License
- MIT
- Repo updated
- 1 June 2026
FAQ
What does the Jtagprobe skill do?
Probe IoT/embedded targets for exposed SWD/JTAG debug interfaces using a SEGGER J-Link. Detects whether debug is OPEN, LOCKED (readout-protected), or DEAD (fused off). Use when assessing whether a target's on-chip debug port can be reached, identifying the silicon vendor from DPIDR/IDCODE, and confirming halt+memory access for full debugger control.
How do I install the Jtagprobe skill?
Claude Code plugin: /plugin marketplace add BrownFineSecurity/iothackbot. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.
Is Jtagprobe popular?
It lives in BrownFineSecurity/iothackbot, which has 890 GitHub stars and 142 forks.
Related skills
Apktool
890BrownFineSecurity/iothackbot
Android APK unpacking and resource extraction tool for reverse engineering. Use when you need to decode APK files, extract resources, examine AndroidManifest.xml, analyze smali code, or repackage modified APKs.
Chipsec
890BrownFineSecurity/iothackbot
Static analysis of UEFI/BIOS firmware dumps using Intel's chipsec framework. Decode firmware structure, detect known malware and rootkits (LoJax, ThinkPwn, HackingTeam, MosaicRegressor), generate EFI executable inventories with hashes, extract NVRAM variables, and parse SPI flash descriptors. Use when analyzing firmware .bin/.rom/.fd/.cap files offline without requiring hardware access.
Ffind
890BrownFineSecurity/iothackbot
Advanced file finder with type detection and filesystem extraction for analyzing firmware and extracting embedded filesystems. Use when you need to analyze firmware files, identify file types, or extract ext2/3/4 or F2FS filesystems.
Library
428disler/the-library
Private skill distribution system. Use when the user wants to install, use, add, push, remove, sync, list, or search for skills, agents, or prompts from their private library catalog. Triggers on /library commands or mentions of library, skill distribution, or agentic management.
Jadx
890BrownFineSecurity/iothackbot
Android APK decompiler that converts DEX bytecode to readable Java source code. Use when you need to decompile APK files, analyze app logic, search for vulnerabilities, find hardcoded credentials, or understand app behavior through readable source code.
Tool Foundation Sprint Readiness
819product-on-purpose/pm-skills
Pre-sprint diagnostic that determines whether a team should run a Foundation Sprint now, postpone it, or do prerequisite work first. Produces a Go / Conditional Go / Wait verdict with diagnosis, recommended preconditions, attendee list, and pre-sprint activities. Use when a team is considering starting a Foundation Sprint and wants a fast yes/no diagnosis before committing two days of facilitated work.
Browse the most popular Claude skills, all software development skills, or write your own with the skills generator.