Gpio Baremetal

Bare-metal GPIO skill for pin configuration and interrupts. Use when configuring GPIO modes, alternate functions, pull resistors, or EXTI interrupts on STM32/nRF/ESP32-class MCUs. Activates on queries about GPIO MODER, alternate function, pin interrupt, or LED/button bare-metal setup.

293 stars 36 forksOther

Install

skills CLI (Claude Code, Cursor, Codex and more)
npx skills add mohitmishra786/low-level-dev-skills --skill gpio-baremetal
Manual install
git clone --depth 1 https://github.com/mohitmishra786/low-level-dev-skills.git /tmp/low-level-dev-skills
mkdir -p ~/.claude/skills
cp -r /tmp/low-level-dev-skills/skills/baremetal/gpio-baremetal ~/.claude/skills/gpio-baremetal

Personal skills live in ~/.claude/skills. Use .claude/skills in a project folder to share a skill with your team.

From the SKILL.md

# GPIO (Bare-Metal)

## Purpose

Configure and use GPIO without HAL: input/output modes, alternate function mapping, pull-up/down, speed/slew, and pin-change interrupts for LEDs, buttons, and peripheral pin mux.

## When to Use

- Blink LED or read button before bringing up UART/SPI
- Mux pins to USART/SPI alternate functions
- EXTI line interrupts on pin edges
- Porting GPIO code between vendors

## Workflow

### 1. STM32 GPIO pattern

```c
/* Enable GPIOA clock */
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;

/* PA5 output — MODER[11:10] = 01 */
GPIOA->MODER &= ~(3U << (5 * 2));
GPIOA->MODER |=  (1U << (5 * 2));

/* Toggle via BSRR — atomic set/reset */
GPIOA->BSRR = (1U << 5);       /* set */
GPIOA->BSRR = (1U << (5+16));  /* reset */
```

Alternate function (e.g., USART2 TX on PA2):

```c
GPIOA->MODER &= ~(3U << (2*2));
GPIOA->MODER |=  (2U << (2*2));           /* AF mode */
GPIOA->AFR[0] &= ~(0xFU << (2*4));
GPIOA->AFR[0] |=  (7U << (2*4));          /* AF7 = USART2 */
```

### 2. Input with pull-up

```c
/* PC13 input, pull-up */
GPIOC->MODER &= ~(3U << (13*2));          /* input mode 00 */
GPIOC->PUPDR &= ~(3U << (13*2));
GPIOC->PUPDR |=  (1U << (13*2));          /* pull-up */

int pressed = !(GPIOC->IDR & (1U << 13)); /* active low */
```

### 3. EXTI interrupt (STM32)
Read the full skill on GitHub

Details

Skill name
gpio-baremetal
Path
skills/baremetal/gpio-baremetal/SKILL.md
License
MIT
Repo updated
14 November 2026

FAQ

What does the Gpio Baremetal skill do?

Bare-metal GPIO skill for pin configuration and interrupts. Use when configuring GPIO modes, alternate functions, pull resistors, or EXTI interrupts on STM32/nRF/ESP32-class MCUs. Activates on queries about GPIO MODER, alternate function, pin interrupt, or LED/button bare-metal setup.

How do I install the Gpio Baremetal skill?

skills CLI (Claude Code, Cursor, Codex and more): npx skills add mohitmishra786/low-level-dev-skills --skill gpio-baremetal. Skills go in ~/.claude/skills (personal) or .claude/skills (project), and Claude loads them automatically when a task matches the description.

Is Gpio Baremetal popular?

It lives in mohitmishra786/low-level-dev-skills, which has 293 GitHub stars and 36 forks.

Related skills

Abi and Calling Conventions

293

mohitmishra786/low-level-dev-skills

ABI and calling conventions skill for cross-language boundaries. Use when explaining System V AMD64, ARM AAPCS, RISC-V psABI, stack frames, variadic calls, or FFI register rules. Activates on queries about calling convention, ABI, System V AMD64, AAPCS, stack frame, variadic function, or FFI registers.

Software Development36

Adc Dac Baremetal

293

mohitmishra786/low-level-dev-skills

Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.

Other36

Af Xdp

293

mohitmishra786/low-level-dev-skills

AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.

Software Development36

Hypervisor Internals

293

mohitmishra786/low-level-dev-skills

Hardware virtualization internals skill for Intel VT-x and AMD-V. Use when studying VMCS/VMCB, EPT/NPT page tables, VMEXIT handling, APIC virtualization, or building minimal hypervisors. Activates on queries about VMX, SVM, VMCS, EPT, NPT, VMEXIT, or type-1 hypervisor.

Other36

Dpdk

293

mohitmishra786/low-level-dev-skills

DPDK skill for userspace packet I/O. Use when initializing EAL, configuring PMD drivers, using mbuf pools and rte_ring, setting up huge pages, RSS, or testpmd validation. Activates on queries about DPDK, EAL, rte_eth_rx_burst, hugepages, PMD, or testpmd.

Other36

Include What You Use

293

mohitmishra786/low-level-dev-skills

Include What You Use (IWYU) skill for optimizing C/C++ header includes. Use when reducing compilation cascades, interpreting IWYU reports, applying mapping files, deciding between forward declarations and full includes, or integrating IWYU with CMake. Activates on queries about IWYU, include-what-you-use, header bloat, reducing includes, forward declarations, compilation cascade, or slow C++ compilation from headers.

Other36

Browse the most popular Claude skills, all other skills, or write your own with the skills generator.